Table of Contents
Advertisement
Chapter 1 Optical Spectrum Measurement
Configuration
Manual
configuration
10
In case of any parameter setting the Test Auto WDM softkey appears.
Fig. 2
Test Auto WDM softkey (1)
Instead of selecting the Test Auto WDM mode the configuration
parameters can be set manually.
The parameter to be modified must be selected by means of the direction
keys
. The possible options then appear on the screen: make your
choice using the direction keys
parameters via the touchscreen.
The various parameters proposed are defined below.
Fig. 3
Configuration for optical spectrum measurements.
(The softkeys available depend on the grid settings.)
MTS / T-BERD 5800 • COSA-4055 • User Manual 2016.01
and
. Alternatively, change the
1
Advertisement
Table of Contents
