Table of Contents
Advertisement
Note:
Nano-OSA user manual
Optical surfaces
Dust and fingerprints can damage optical surfaces,
particularly when such surfaces are pressed together. To
protect the instrument and cables, every cable should
be cleaned before it is connected to the instrument. The
optical connectors on the instrument should also be
cleaned regularly.
To clean the optical connectors:
1. Remove the test adapters.
2. Dab the end surfaces of the plug pins with cleaning
tape and blow out the test adapter using com-
pressed air.
Always fit protective caps to optical connectors that are
not in use.
Maintenance
51/59
Advertisement
Table of Contents
