Operating Elements And Connections - ProLights BEAMROLL8Q User Manual

1.3 OPERATING ELEMENTS AND CONNECTIONS

2
Control Panel and Controller
1. LED BAR
2. POWER IN (PowerCON IN): for connection to a
socket (100-240V~/50-60Hz) via the supplied
mains cable.
3. POWER OUT power output for connection of
multiple units in series
4. MAIN FUSE HOLDER (250V/T3.15A) replace a
burnt-out fuse by one of the same type only)
5. SAFETY RING to attach safety cable
6. DMX OUT ( 3-pole XLR):
1 = ground, 2 = DMX -, 3 = DMX +
7. DMX IN (3-pole XLR):
1 = ground, 2 = DMX -, 3 = DMX +
8. MICROPHONE for music control
9. CONNECTION Jack for the remote control
EC800
10. LED INDICATOR (DMX, Master, Slave, Sound)
BEAMROLL8Q
3 4 5 6 7 8
1
9 10 11
11. CONTROL PANEL with display and 4 buttons
for access and management of different
functions
12. REMOTE CONTROL EC800
13. Button STAND BY - The movable head is
brought into the starting position and the
light beam is turned off. The LED next to the
button comes on as a control
14. Button FUNCTION for different functions
depending on the operating mode selected
with the MODE button
15. Button MODE:
- Mode Sound (LED off )
- Mode Show (LED on)
- Mode speed (LED blinking)
NOTE - For operation via the remote control, no
DMX signal must be present at the input DMX IN..
12
5
13
14
15
Fig.1