General
5.
Product Documentation Organization
The product documentation organization for Kontron's CPCI Backplanes is as follows:
1. CPCI Backplane Manual (ID: 24229)
2. CPCI Backplane Product Documentation Guide (ID: 24229, Sub-ID: PDG)
3. Specific Kontron CPCI Backplane Product Documentation (ID: 24229, Sub-ID: PDnn)
Item 1 above is represented by this manual which provides generic information about Kontron's
CPCI backplanes. Item 2 is enclosed with this manual for referencing to applicable CPCI Back-
plane Product Documentation. Item 3 represents the individual product documentation for spe-
cific backplanes. For each backplane addressed in item 2 there is a separate document
available.
Each of the above items are maintained independently of one another, whereby item 2 always
reflects the current status of available product documentation.
6.
Applied Standards
The Kontron Modular Computers' CompactPCI backplanes comply where applicable with the
requirements of the following standards.
6.1
CE Compliance
•
Emission
•
Immission
•
Electrical Safety
6.2
Other Safety Standards
•
UL, CSA, DVE, NEMKO
6.3
Mechanical Compliance
•
Mechanical Dimensions
6.4
Environmental Tests
•
Vibration/Broad-Band
•
Random Vibration
•
Permanent Shock
•
Single Shock
Page 14
EN50081-1, EN 55011/EN 55022
EN50082-2, EN 61000-4
EN60950, VDE 0100, VDE 0805
IEEE 1101.10
IEC68-2-6
IEC68-2-64 (3U boards)
IEC68-2-29
IEC68-2-27
© 2005 Kontron Modular Computers GmbH
CPCI Backplane
ID 24229, Rev. 03