Establish Transmitter Settings - Primex XR Series Install & User's Manual

replacing xxx.xxx.xxx.xxx with the temporary IP address of the Transmitter.
If replies are received, you will be able to access the Transmitter through the web interface.

Establish Transmitter Settings

The setting panel is located on the back of an XR Series Transmitter. The setting panel consists of dial and dip switch settings that
set its channel number, time zone, and time source.
Channel Number
Preset by factory. The Channel Number is set according to the FCC Site License; do not attempt to change without contacting
Primex.
Time Zone
Transmitter with Internal Antenna: set the Time Zone dial to your system Time Zone using the dial Time Zone switch.
l
Time zone dial switch specifications
4 for Atlantic Time Zone
5 for Eastern Time Zone
6 for Central Time Zone
7 for Mountain Time Zone
8 for Pacific Time Zone
9 for Alaska Time Zone
A for Hawaii Time Zone
0 for Greenwich Mean Time (GMT)
Time source and time settings
Set the Transmitter dip switch settings below to meet the system requirements.
23
XR 1 Watt Transmitter - Internal Antenna Install & User Guide