Set A Temporary Ip Address For The Transmitter Lan Interface - Primex XR Series Install & User's Manual

NOTE
Be sure to write down and file the changes you make to the network configuration settings. Once the default static IP
address is changed, the factory-default IP address will no longer work and you must use the new settings to access
the Transmitter configuration.
9. (Optional) Enter the IP address of the NTP server to set the Transmitter's time source.
10. Click OK.
11. Click Apply Settings on the configuration frame.
The Transmitter automatically reboots (restarts). The window below is displayed.

Set a Temporary IP Address for the Transmitter LAN Interface

When configuring a Transmitter for NTP time and the IP address of the Transmitter is not known, you can assign a temporary IP
address. Using the temporary IP address you can then access the Transmitter's network settings configuration screen to set the
NTP time source. You may need to perform this procedure if you have forgotten the Transmitter's IP address or if the Transmitter
is set to use DHCP.
NOTE
The assigned temporary IP address used during this procedure is only accessible as long as the Transmitter is powered. If
power is lost before the IP address is configured, you will need to repeat this procedure.
21
XR 1 Watt Transmitter - Internal Antenna Install & User Guide