GPS Receiver installation components and illustration
Establish Transmitter Connections
Internal antenna
The supplied antenna is attached onto the top case of the Transmitter.
Carefully screw the Transmitter antenna onto the Transmitter. Turn the antenna clockwise, being careful to avoid cross-threading
the antenna. The antenna must be snug and flat against the case.
Time source connection
The system can be configured to use GPS or NTP time.
GPS: plug the supplied GPS cable into the Transmitter "GPS IN" connection.
l
NTP time: connect a network cable to the Ethernet port/Network LAN connection and configure the Transmitter to use NTP
l
time.To learn more, view " Configure NTP Time (Optional)" on page 1.
1 Watt Transmitter connection illustration
16