Clear Error Codes - Primex XR Series Install & User's Manual

How to view Diagnostic Error Code(s)
1. Move the selection arrow so that it's pointing to the Diagnostic Error Codes, then press the
Diagnostic Error Codes definitions
Bad Output Power: indicates the Transmitter is not transmitting at the appropriate power level.
PLL Diagnostics: indicates the Transmitter is having trouble locking onto a channel; rendering it unable to broadcast time or
schedules.
No GPS or Repeater Connected: indicates the Transmitter is not connected to a time source.
VSWR Errors: indicates there is a problem with either the High Power Antenna (may need repositioning) or the antenna cabling.
No GPS in 48 Hours: indicates the Transmitter has not synchronized to a time source for more than 48 hours.
No 1PPS in 48 Hours: indicates the time on the display has not been synchronized by 1PPS (1 Pulse Per Second) for more than 48
hours.

Clear Error Codes

Clearing a XR Transmitter error code stops the yellow and red LEDs from flashing.
How to clear error codes
1. From the front panel, press right arrow
2. Use the down arrow button to select Diagnostic Error Codes, then press the right arrow
3. Use the down arrow button to scroll to the error, which is indicated by a preceding dot next to the error.
4. Press the right arrow
error.
5. Press the right arrow
29
button once to access the Main Menu.
button once. The display will show when the error was logged. Note the time and data of the
button once.
XR 1 Watt Transmitter - Internal Antenna Install & User Guide
button once.
button once.