Calibration Menu - Honeywell Apex Technical Handbook

MAN0604_Issue 09_02-2013
2110M8030

4.4.1 Calibration Menu

Caution: The calibration procedure should only be performed by qualified personnel.
Caution: "If "Yes" is selected for the "Span Calibrate?" option, the span calibration must
be completed successfully. Failure to do so will result in the unit signaling a
"Calibration Needed" fault.
Calibration Menu
Gas Calibrate
Gas Challenge
4-20 mA Set Zero
Force 4-20mA
Force Relays
Force Digital
The Calibration Menu allows settings for the Transmitter Unit to be made, e.g. relay operation, and
also settings for the Certified Sensor, e.g. gas calibrate.
This menu is protected by a Level 2 password.
4. OPERATION
57
Apex