Honeywell Apex Technical Handbook page 62

MAN0604_Issue 09_02-2013
2110M8030
Force Digital
Caution: Ensure that when forcing a signal on the digital output that the effects on the
network and controller are understood, e.g. alarm activation, etc.
This option allows the digital output (if a digital communications board is fitted to the Transmitter Unit,
e.g. LonWorks) to be forced to output an alarm signal, from Alarm 1 or Alarm 2 or no alarm.
Times out after approximately 5 minutes. The 4-20mA output and relays are unaffected
4. OPERATION
Force Digital
ok
Force Digital screen
Select output
from 0, 1 or 2
esc
Calibration Menu
62
Calibration Menu
Use up/down
buttons
0 = No output
1 = Alarm 1 output
2 = Alarm 2 output
Apex
.