Printer Components - Raise3D Pro2 Manual

Printer Components and Parts
1. Front Parts
A Filament Run-out Sensor
That can detect whether filament has been run out.
B Filament Feeder
That's part includes feeder motor and gear mechanical.
C Hot Ends
The hotend is made up of Nozzle,heater block, thermocouple, heater cartridge and heat sink. Nozzle
temperatures in the printer can exceed 300℃(572℉).
D Touch screen
That is human machine interface. All operation commands are from this. Some alarm information
can be displayed on the screen.
E Print bed
Print bed includes buildtak sheet and heat bed.
temperatures in the printer can exceed 110℃.
E Z-stage
That platform supports the print bed.
2. Rear Parts
COMPONENTS AND PARTS
WARNING
WARNING