A Camera
That can monitor the printing process in remote place.
B Filament guide tube
This tube is perfect for minimizing bending and friction against the filament material.
C HEPA filter
That is designed to improve air quality on exhaust and deduce smell from filaments.
D Z ball screws
The parts can drive Z stage's movement.
E USB storage slots
F Power inlet and Power switch
That is the power supply unit.
A 250V 10A fuse is located to protect the input power.
3. Bottom Parts.
COMPONENENTS AND PARTS
WWW.RAISE3D.COM
AMERICA · ASIA · EUROPE
7