Modular Disk Adapters; Bottle Adapters And Blood Bag Cups; Cell Culture Flask Adapters; Decontamination - Beckman Coulter SX4750A Instruction For Use, Installation And Assembly

4
Before reinstalling the rotor yoke, lightly lubricate the drive hole with Spinkote (306812) to
prevent the rotor from sticking.

Modular Disk Adapters

1
To disassemble adapters for washing, first pull the bail out of the groove in the disks, then
remove the disks and unsnap the bail from the rubber bottom.
2
Use a mild detergent such as Solution 555 (339555), diluted 10 to 1 with water, and a soft brush
to scrub the adapters.
3
Rinse and dry, then reassemble.

Bottle Adapters and Blood Bag Cups

1
Use a mild detergent such as Beckman Solution 555 (339555), diluted 10 to 1 with water, and a
soft brush to clean bottle adapters and blood bag cups.
2
Thoroughly rinse with water and air-dry upside down.

Cell Culture Flask Adapters

Refer to publication GX-TB-007 (25-cm
culture flask adapter cleaning instructions.

Decontamination

If aluminum rotor components become contaminated with radioactive material, decontaminate
them using a solution that will not damage the anodized surfaces. Beckman Coulter has tested a
number of solutions and found two that do not harm anodized aluminum: RadCon Surface Spray or
IsoClean Solution (for soaking),
GX-TB-004EE
2
flask adapters) or GX-TB-006 (75-cm
* †
and Radiacwash.
SX4750A Swinging-Bucket Rotor
Care and Maintenance
2
flask adapters) for cell
1-27