Table of Contents
Advertisement
Renesas Synergy™ Platform
The MCU board includes the following main components:
• The Synergy S5D9 MCU featuring 2 MB code flash/640 KB SRAM/64 KB data flash.
• A power management based on 3.3V LDO voltage regulator required for the operation of the microcontroller.
• Quad SPI flash – the MCU flash memory is expanded with external 256 Mbits (32 MB) memory device connected
over a high-speed QSPI interface. The external flash can be used for storage of graphics and other digital assets, or
for execution of code in place (XIP).
• User-defined LEDs – the user-defined LEDs are useful in indicating the current state of the firmware. The 3 LEDs
have different colors for easy identification.
• USB device interface – the S5D9 MCU includes one USB interface operating at full speed. The USB device
connector is also used to power the board.
• PMOD interface header – the board includes one 12-pin PMOD header that can be configured by a jumper to
provide 3.3V on its power pins. The header enables interfacing with other devices over SPI or UART.
• Grove connectors – the Grove connectors are compatible with the Seeed Studio's line of peripheral modules that
include a very large selection of sensors and actuators. One of the Grove connectors can be configured to
communicate over UART and the other is dedicated for I
• J-Link On-Board SEGGER debugging probe based on Synergy S124 MCU.
• JTAG interface that is available on a 10-pin connector (J20) compatible with SEGGER debugging probe.
• The board includes a number of sensors described in detail in section 5.3.
4.2 Power Requirements
The AE-CLOUD2 is designed to be powered by the USB device interface on J9 connector.
The S5D9 board can supply power to the devices connected to it. The PMOD interface and the Grove connectors can
power 3.3V peripherals.
The power supply requirements and current consumption specifications are listed in following table.
Table 1 Electrical Specifications
Parameter
Power Supply Voltage
Current Consumption
Digital Inputs Voltage
Digital Outputs Voltage
Operating Temperature
PMOD Connector Power Voltage
Grove Connectors Power Voltage
R12UM0033EU0100 Rev.1.00
Sep 5, 2018
Application Example for Cloud Connectivity (AE-CLOUD2)
2
C interface.
Value
Minimum
Maximum
3.7V
5.5V
500 mA
0V
3.3V
0V
3.3V
0°C
+75°C
3.3V
3.3V
Page 10 of 48
Advertisement
Table of Contents
