Advertisement
Quick Links
Quick Start Guide: ASSP EASY Motor Control Kit
Document Contents
1.
Introduction
2.
Kit layout
3.
Initial Board Configuration
4.
PC Graphical User Interface (GUI) Software Installation
5.
Installing USB Drivers
6.
Using the Graphical User Interface (GUI)
7.
Additional material
8.
Support
1. Introduction
Welcome to the Renesas ASSP EASY Motor Control reference kit!
This quick start guide assists the user to connect and use the Renesas ASSP EASY Motor Control Kit for the first
time. The on-board ASSP internal flash memory is pre-programmed with a motor control project. Please check
the contents of the kit using the supplied package contents list and notify your supplier if any are missing.
Please note: no CD-ROM is provided in the kit.
PLEASE DO NOT CONNECT THE BOARD TO THE HOST PC BEFORE INSTRUCTED
2. Kit layout
ASSP EASY Motor
Control Board
PMS Motor
For further board details, please refer to the ASSP EASY Motor Control Solution User Manual.
ASSP EASY Motor Control Kit Quick Start Guide – rev. 1.0
1
1
1
2
3
4
4
6
6
"Graphical User
Interface" SW
Type C, USB cable
24Vdc, 2.5A
Power supply
Advertisement
Related Manuals for Renesas ASSP EASY
Summary of Contents for Renesas ASSP EASY
- Page 1 Welcome to the Renesas ASSP EASY Motor Control reference kit! This quick start guide assists the user to connect and use the Renesas ASSP EASY Motor Control Kit for the first time. The on-board ASSP internal flash memory is pre-programmed with a motor control project. Please check the contents of the kit using the supplied package contents list and notify your supplier if any are missing.
- Page 2 Plug-in the USB cable from the PC to supply power directly to the board. In this case the current delivered to the motor is limited by the USB and U5 IC (step-up Renesas ISL97656) capabilities. b. The second method is to power the board using an external voltage DC source.
- Page 3 For full details of power supply options please refer to Chapter 5 of the ASSP EASY Motor Control Solution User Manual. 4. For initial setup of the Renesas ASSP EASY Motor Control Kit the first method must be used (USB powered option ‘a’). Ensure that Jumpers PN2 and PN3 are correctly configured as described below.
-
Page 4: Installing Usb Drivers
5. Installing USB Drivers The ASSP EASY Motor Control Kit features an on-board USB to serial (UART) converter interface, to communicate with the PC. It is mandatory to download and install the respective USB divers for enabling the communication. Please download and install the latest drivers from https://ftdichip.com/drivers/. - Page 5 “system display” windows provided by the GUI. “RPM Control” knob ASSP EASY Motor Control Kit Quick Start Guide – rev. 1.0...
- Page 6 Once the motor is setup to work properly with the USB power supply, it is advisable to switch to the external 24V, 2,5A power supply provided with the kit. For full details of power supply options please refer to Chapter 5 of the ASSP EASY Motor Control Solution User Manual.