Renesas Synergy AE-CLOUD2 User Manual page 5

Renesas Synergy™ Platform
The kit also includes a cellular connectivity shield based on the Quectel BG96 module. It provides 4G/LTE Cat-M1
(eMTC) and 4G/LTE Cat-NB1 (NB-IoT) support with fallback to 2G/EGPRS mobile networks. In addition, it integrates
a GPS receiver which enables the development of position-tracking applications.
PWRKEY
Push Button
SIM Card
Slot
4-pin
DBG Header
8-pin
Voice Header
6-pin
I/O Header
Micro USB
At the heart of the kit is the MCU board based on the Renesas Synergy™ S5D9 Microcontroller. Figure 4 describes the
main board components, the interface connectors, and their purpose.
Push Button (Reset)
TXC 25MHz Crystal
Realtek 10/100Mbps Ethernet PHY
HanRun Low Profile RJ-45 Connector
TXC 12MHz Crystal
Grove (I2C)
Renesas Synergy S124 JLOB MCU
Grove (UART/ADC)
J-Link LED (Green)
Push Button (User)
R12UM0033EU0100 Rev.1.00
Sep 5, 2018
Application Example for Cloud Connectivity (AE-CLOUD2)
RESET
Push Button
LED
(G,B,R)
Figure 3 Arduino Shield for Cellular Network Connectivity
Renesas Digital Arduino Header
Ambient Light Sensor
USB
(Debug/Power)
Figure 4 S5D9 Synergy MCU Board Components
Arduino Header Arduino Header
(IOH)
Arduino Header Arduino Header
(Power)
Renesas Synergy S5D9 MCU
Arduino Header
(IOH) (IOL)
Arduino Header Arduino Header
(Power) (AD)
Cellular
(IOL) Antenna
BG96
Module
USB Boot
Jumper
GPS
(AD) Antenna
USB (Device/Power)
ISSI QPSI Flash (32MB)
Power LED (Green)
User LED (Red)
User LED (Yellow)
User LED (Green)
JTAG Connector
PMOD Connector
Bosch 3-aixs Accelerometer/3-axis Gyroscope
Bosch Geomagnetic Sensor
Bosch Environmental Sensor
Knowles high SNR/AOP Analog Microphone
Page 5 of 48