Oil Strainer; Crankcase - Suzuki QuadRacer LT-R450 Service Manual

OIL STRAINER

• Clean the oil strainers using the compressed air.

CRANKCASE

GEARSHIFT ARM STOPPER
• Remove the gearshift arm stopper 1 and washer 2.
• Apply a small quantity of THREAD LOCK SUPER "1303" to
the gearshift arm stopper.
• Install the washer 2 and tightening the gearshift arm stopper
1 to the specified torque.
+ 99000-32030: THREAD LOCK SUPER "1303"
" Gearshift arm stopper: 32 N·m (3.2 kgf-m, 23.0 lb-ft)
OIL SEAL INSPECTION
Inspect the oil seal lips for wear or damage. If any defects are
found, replace the oil seal with new ones.
OIL SEAL REMOVAL
• Remove the crankcase plate 1.
• Remove the oil seals 2.
ENGINE 3-51