6-14
COOLING AND LUBRICATION SYSTEM
WATER PUMP
REMOVAL AND DISASSEMBLY
NOTE:
Before draining engine oil and engine coolant, inspect engine oil
and coolant leakage between the water pump and crankcase. If
engine oil is leaking, visually inspect the oil seal and O-ring. If
engine coolant is leaking, visually inspect the mechanical seal
and seal washer. (%6-16)
• Drain engine coolant. (%2-15)
• Drain engine oil. (%2-13)
• Disconnect the radiator hose 1 and breather hose 2.
• Remove the rear brake switch 3 and brake pedal 4.
(%7-67)
• Remove the right oil tank hose.