ENGINE
3-57
GEARSHIFT SHAFT
DISASSEMBLY
• Remove the following parts from the gearshift shaft 1.
2 Shim
3 Snap ring
4 Return spring
& 09900-06107: Snap ring pliers
INSPECTION
Inspect the gearshift shaft for bend or damage.
Inspect the return spring for damage or fatigue.
Replace the defective parts with a new one if necessary.
REASSEMBLY
Reassemble the gearshift shaft in the reverse order of disas-
sembly. Pay attention to the following points:
NOTE:
When installing the gearshift shaft return spring, position the
stopper A of gearshift arm between the shaft return spring ends
B.