Backrest Section Adjustment; Bed Height Adjustment; Auto-Contour Adjustment - Ultimate Healthcare Cura II User Manual

9.3

Backrest section adjustment

To raise the head section press and hold the Up Backrest Adjustment Button on
the handset until it reaches the desired height.
To lower press and hold the Down Backrest Adjustment Button on the handset.
9.4

Bed height adjustment

To raise the height of the bed press and hold the Up Height Adjustment Button on
the handset until it reaches the desired height.
To lower press and hold the Down Height Adjustment Button on the handset.
Caution: Before adjusting the height of the bed ensure there is nothing to obstruct
the movement of the bed and ensure that no cables will become pinched or be
over stretched.
9.5

Auto-contour adjustment

Auto-contour adjustment allows for the simultaneous adjustment of both the backrest and knee-
break sections.
To raise the backrest and knee-break sections of the bed, press and hold the Up
Auto-Contour Adjustment Button on the handset to reach the desired position.
To lower the backrest and knee-break sections of the bed, press and hold the
Down Auto-Contour Adjustment Button on the handset to reach the desired
position.
Issue: 6: 08/11/2018
DRAFT
Page 18 of 40