Lifting Poles; Side Rail Bumpers; Mattress Squab; Mesh Full Length Side Rail Bumpers - Ultimate Healthcare Cura II User Manual

13.5 Patient Lifting Pole
1. Insert base section into locating hole at the head end of the bed.
2. Insert the top section of the pole and attach the handle

13.6 Side Rail Bumpers

1. Wrap the side rail bumper UBEB002001 over the side rail and secure the velcro at the
bottom of the side rail. A full length rail bumper UBEB002001FL can also be used on a
full length rail.

13.7 Mattress Squab

1.
Extend the bed 200mm and insert the Mattress Squab USPF3408 at the head end of the
bed.
Issue: 6: 08/11/2018
DRAFT
Page 27 of 40