Mounting And Withdrawing Output Transmission Elements - Siemens SIMOTICS SD Operating Instructions Manual
Low-voltage motors
Hide thumbs
Also See for SIMOTICS SD:
- Operating instructions manual (142 pages) ,
- Compact operating instructions (166 pages) ,
- Compact operating instructions (26 pages)
Table of Contents
Advertisement
Assembly
5.1 Installation
5.1.6.1
Mounting and withdrawing output transmission elements
● When mounting output transmission elements (coupling, gear wheel, belt pulley etc. ) use
the thread at the shaft end.
● Use a suitable device when withdrawing output elements.
● When mounting or withdrawing, do not apply any blows, for example with a hammer or
similar tool, to the parts to be mounted or withdrawn.
● Only transfer radial or axial forces specified in the catalog to the motor bearings via the
shaft extension.
36
Withdrawing output transmission elements
Mounting output transmission elements
If possible, heat up the output transmission elements as required.
Operating Instructions, 05/2014, 5 610 00000 02 000
Low-voltage motors
Advertisement
Table of Contents
