Mounting And Withdrawing Output Transmission Elements - Siemens SIMOTICS XP 1MB1 series Operating Instructions Manual

Align the offset at the coupling between electrical machines and the driven machines so that
the maximum permissible vibration values according to ISO 10816-3 are not exceeded.
5.2.2.1

Mounting and withdrawing output transmission elements

● When mounting output transmission elements (coupling, gear wheel, belt pulley etc. ) use
the thread at the shaft end.
● Use a suitable device when withdrawing output elements.
1LA5/6/7/9, 1LG4/6, 1MA6/7, 1MB..1/2/3/4/5 - SH 63 ... 355
Operating Instructions, 06/2018, A5E44455710A
Withdrawing output transmission elements
Mounting output transmission elements
If possible, heat up the output transmission elements as required.
5.2 Mounting and installed the machine
Assembly
57