Storage - Siemens SIMOTICS SD Operating Instructions Manual

Preparing for use

4.3 Storage

Toppling over or slipping of the motor
The motor can slide or topple over if it is not correctly lifted or transported. This can result in
death, serious injury, or material damage.
• Use all the lifting eyes on the machine.
• Any eyes that are screwed in must be tightly fastened.
• Eyebolts must be screwed in right up to their supporting surface.
• If necessary, use suitable, sufficiently-sized transport equipment such as lifting straps
If any transport locks are in place, remove them before commissioning. Store the transport
locks or disable them. Use the transport locks when transporting the motors again or
reactivate the transport locks.
The machines are packed in different ways depending on how they are transported and their
size. If not otherwise contractually agreed, the packaging corresponds to the packing
guidelines according to ISPM (International Standards for Phytosanitary Measures).
Comply with the images shown on the packaging. Their meaning is as follows:
Up
4.3 Storage
Storing outdoors
NOTICE
Damage to the motor
Damage can occur if incorrectly stored.
Take all precautions to protect the motor under extreme climatic conditions, e.g. salt-laden
and/or dusty, moist/humid atmospheres.
Choose a dry storage location which is safe from flooding and free from vibration. Repair any
damage to the packaging before putting the equipment into storage if this is necessary to
ensure proper storage conditions. In order to ensure protection against ground moisture,
28
WARNING
(EN1492-1) and lashing straps (EN12195-2).
Fragile
goods
Protect Protect
against against
moisture heat
Operating Instructions, 05/2014, 5 610 00000 02 000
Center of Hand hooks
gravity forbidden
Attach
here
Low-voltage motors