Description
3.3 Installation
3.3.6
Types of construction/method of installation
Damage caused by small parts falling in
Material damage and injury can occur if the fan is destroyed and therefore the motor
overheats.
• For types of construction with a shaft extension facing downwards, a suitable cover
• Prevent the cooling airflow from being reduced as a result of covers that might be in
Further possible fields of application
The type of construction of the machine is stated on the rating plate.
Note
When lifting the machines for transport, only lift them in a position that corresponds to their
basic construction type.
Table 3- 3
Basic type of
construction code
IM B3 (IM 1001)
22
WARNING
must be fitted to prevent small parts from falling into the fan cover (see also standard
IEC / EN 60079-0).
place.
Type of construction
Diagram
Other methods of
installation
IM V5 (IM 1011)
IM V6 (IM 1031)
IM B6 (IM 1051)
IM B7 (IM 1061)
IM B8 (IM 1071)
Operating Instructions, 05/2014, 5 610 00000 02 000
Diagram
Low-voltage motors