Ordering Example - Siemens SIMOTICS SD Operating Instructions Manual

Spare parts
10.2 Parts groups definition
Other parts
Other parts are small parts required to complete the exploded drawing. They cannot,
however, be supplied as individual spare or repair parts. The delivery in assembly units (e.g.
complete terminal box) is possible on request.
The following supply commitment apply to replacement machines and spare parts following
delivery of the motor:
● For up to five years, in the event of total machine failure, Siemens will supply a
comparable machine with regard to the mounting dimensions and functions.
● Spare parts will be available for up to five years.
● After the time period of up to five years, Siemens provides information about spare parts
and will supply documents when required.
● Spare machine deliveries after the active production of the machine series are also
identified as "Spare motor" on the nameplate. Spare parts are offered only on request for
these machines.

Ordering example

Table 10- 1
End shield, drive end
Machine type *
ID no. *
* corresponding to the rating plate
Table 10- 2
End shield, drive end
Machine type *
ID no. *
* corresponding to the rating plate
Take the type and serial number from the rating plate and the machine documentation.
When replacing rolling-contact bearings, in addition to the bearing identification code, the
replacement code for the bearing version is required. Both of these codes are specified on
the rating plate and in the machine documentation. They are also shown on the installed
bearings.
The graphical representations in this chapter show schematic diagrams of the basic
versions. They are used for spare part definitions. The supplied version may differ in details
from these representations.
106
Ordering example
Ordering example
1.40 End shield
1LA7163-4AA60
E0705/1234567 01 001
1.40 End shield
1LE1002-1DB43-4AA0
E0605/0496382 02 001
Operating Instructions, 05/2014, 5 610 00000 02 000
Low-voltage motors