CyberData SIP PAGING ADAPTER Configuration Manual page 55
Hide thumbs
Also See for SIP PAGING ADAPTER:
- Connecting (6 pages) ,
- Connections (2 pages) ,
- Connections (2 pages)
Table of Contents
Advertisement
Autoprovisioning
If you are autoprovisioning the SPA, use the following steps to configure the SPA to join
multicast paging groups receiving pages from the CyberData V3.1 Paging Server and Polycom
phones.
1. Identify the multicast IP addresses and port numbers for each paging group you need to
configure. See
2. Set EnableMulticastOperation to Yes under MulticastSettings in the autoprovisioning
template.
3. Each MGROUP corresponds to a numbered priority, as shown on the Multicast
Configuration page in the web interface (see
the highest priority reserved for emergencies. Enter the multicast IP addresses and port
numbers for each paging group according to the appropriate priority.
Figure 8-6. Autoprovisioning Example – Multicast Groups
RING CENTRAL CONFIGURATION GUIDE: SIP PAGING ADAPTER (SPA)
Table 8-1
for example paging groups.
CyberData Corporation
3 Justin Court, Monterey, CA 93940
www.cyberdata.net
P 831.373.2601 | F 831.373.4193
Doc. 931050B
Figure
8-4). 0 is the lowest priority and 9 is
Page 54
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SIP PAGING ADAPTER and is the answer not in the manual?
Questions and answers