Configuration Procedure: Auto-Answer Paging - CyberData SIP PAGING ADAPTER Configuration Manual

5.0 Configuration Procedure: Auto-Answer Paging

Auto-answer paging to your analog paging system can be implemented with a CyberData SIP
Paging Adapter when provisioned as a free RingCentral Paging Device.
As the best product for connecting to analog amplifiers, the SIP Paging Adapter can be installed
to interface with a wide variety of analog paging systems and expand paging capabilities to
include grouping within the RingCentral Admin Portal.
The RingCentral Paging feature delivers real-time broadcasts to your desk phones and/or paging
devices. The SIP Paging Adapter can be added to Paging Only groups supporting a combination
of CyberData paging endpoints and RingCentral Polycom and Cisco paging-capable IP desk
phones.
Provision the SIP Paging Adapter as a free RingCentral Paging Device if the installation only
requires one-way, live pages.
Add a Free Paging Device
Use the following steps to provision a free Paging Device and add it to a Paging Only group
through the RingCentral Admin Portal.
Note: RingCentral Paging Devices cannot originate calls, receive DTMF tones, or send
audio back to the caller when used in Paging Only groups.
1. Login to the RingCentral Admin Portal at https://service.ringcentral.com.
RING CENTRAL CONFIGURATION GUIDE: SIP PAGING ADAPTER (SPA)
Figure 5-1. RingCentral Admin Portal Login
CyberData Corporation
3 Justin Court, Monterey, CA 93940
www.cyberdata.net
P 831.373.2601 | F 831.373.4193
Doc. 931050B Page 13