Features
• Voice prompted paging menu
• Secondary endpoint for loud ringing to multicast or analog output
• 9 configurable stored pages
• Delayed paging
• SIP (RFC 3261) compatible
• Receives industry standard or Polycom* multicast pages
• Web-based graphical user interface or TFTP/HTTP autoprovisioning
• DTMF zone selection for IP zone control
• DTMF pass-through for analog zone control
• RCA Line Level input connection for background music
• RCA Line Level analog output (10k Ohms @ 2 VPP)
• Page Port analog output (600 Ohms @ 5 VPP)
• Dry relay contact closure for page initiation
• Normally-open or normally-closed selectable sense input for fault detection
*Polycom Group Paging is supported on Polycom IP phones using UC Software 4.0.0 and higher
RING CENTRAL CONFIGURATION GUIDE: SIP PAGING ADAPTER (SPA)
CyberData Corporation
3 Justin Court, Monterey, CA 93940
www.cyberdata.net
P 831.373.2601 | F 831.373.4193
Doc. 931050B
Page 11
Need help?
Do you have a question about the SIP PAGING ADAPTER and is the answer not in the manual?
Questions and answers