CyberData SIP PAGING ADAPTER Configuration Manual page 30

Alternately, set Bypass DTMF to Yes and Use Security Code to No under DeviceSettings in the
autoprovisioning template if you are autoprovisioning the SPA.
Figure 5-22. Autoprovisioning Template Example – Device Settings
Note: While a security code cannot be used when the SPA's paging extension is
provisioned as a Paging Device, you can restrict users allowed to page through the
Paging Only group's Paging menu
Beep on Page
RingCentral sends a beep before transmitting the voice page made by the caller to the Paging
Only group. It is not necessary to enable Beep on Page, also known as BeepBeforePage in the
autoprovisioning template, on the SPA. This setting is disabled on default.
If you are hearing an unusual sounding beep before voice pages play when making a call to the
Paging Only group, disable the SPA's Beep on Page.
This setting is located on the Device Configuration page of the web interface (see
It is also listed under DeviceSettings in the autoprovisioning template (see
Make a Test Call
Once your paging extension has registered with RingCentral, you may use any allowed
RingCentral phone to dial the paging extension.
RING CENTRAL CONFIGURATION GUIDE: SIP PAGING ADAPTER (SPA)
in the RingCentral Admin Portal.
CyberData Corporation
3 Justin Court, Monterey, CA 93940
www.cyberdata.net
P 831.373.2601 | F 831.373.4193
Doc. 931050B Page 29
Figure 5-21).
Figure 5-22).