CyberData SIP PAGING ADAPTER Configuration Manual page 27

Autoprovisioning
If you are autoprovisioning the SPA, use the SIP Settings in the autoprovisioning template to
register the SPA with RingCentral.
An autoprovisioning template is provided in the respective firmware folder available on the
Downloads tab of the product webpage here:
http://www.cyberdata.net/voip/011233/
Be sure to use the autoprovisioning template for the firmware version running on the SPA. The
firmware version can be verified on the
Refer to the Operations Guide for instructions on autoprovisioning configuration.
Figure 5-19. Autoprovisioning Template Example – SIP Settings
Note: These example values are published only for reference. The SIPAuthPassword
value should be the actual value from the
window.
RING CENTRAL CONFIGURATION GUIDE: SIP PAGING ADAPTER (SPA)
Home page of the web
Generic Paging Device Provisioning
CyberData Corporation
3 Justin Court, Monterey, CA 93940
www.cyberdata.net
P 831.373.2601 | F 831.373.4193
Doc. 931050B
interface.
Page 26
popup