Wall-Mount Plate Mounting - Planet IGTP-802T User Manual

2.2.2 Wall-mount Plate Mounting

To install the Industrial 802.3at PoE Media Converter on the wall,
please follow the instructions described below.
Step 1: Remove the DIN-rail bracket from the Industrial 802.3at PoE
Media Converter; loosen the screws to remove the DIN-rail
bracket.
Step 2: Place the wall-mount plate on the rear panel of the Industrial
802.3at PoE Media Converter.
Step 3: Use the screws to screw the wall-mount plate on the
Industrial 802.3at PoE Media Converter.
Step 4: Use the hook holes at the corners of the wall-mount plate to
hang the Industrial 802.3at PoE Media Converter on the wall.
Step 5: To remove the wall mount plate, reverse the steps above.
22