Wall Mount Plate Mounting - Planet IGT-1205AT User Manual

Industrial 10/100/1000base-t to 2 100/1000base-x sfp media converter

Hide thumbs Also See for IGT-1205AT:

Table of Contents

Step 5: Lightly pull out the bottom of the DIN-Rail from the track to

remove.

2.2.2 Wall Mount Plate Mounting

To install the Industrial Gigabit Media Converter on the wall, please

follow the instructions described below.

Step 1: Remove the DIN-Rail from the Industrial Gigabit Media

Converter; loose the screws to remove the DIN-Rail.

Step 2: Place the wall mount plate on the rear panel of the Industrial

Gigabit Media Converter.

Step 3: Use the screws to screw the wall mount plate on the

Industrial Gigabit Media Converter.

Step 4: Use the hook holes at the corners of the wall mount plate to

hang the Industrial Gigabit Media Converter on the wall.

Step 5: To remove the wall mount plate, reverse steps above.

Table of Contents