Preparing The Notebook For Use - Siemens Mobile 750 Operating Manual

Preparation for use and operation
•
For wireless data transfer you must align the notebook's infrared interface with that of the partner
device (e.g. PC). The devices must not be more than one meter apart.

Preparing the notebook for use

The supplied power cord conforms to the requirements of the country in which you
!
purchased your notebook. Make sure that the power cable is approved for use in the country
in which you intend to use it.
The notebook and the power adapter should be at least 200 mm apart. Keep other objects
100 mm clear of the notebook and its power adapter.
Do not cover the ventilation slots in the notebook.
²²
Place the notebook on a level, stable surface.
Depending on the version, your notebook will be supplied with and internal or an external power
adapter.
External power adapter
1
²²
Plug the DC output connector on the power adapter into the DC input connector (DC IN) on the
notebook (1).
²²
Connect the AC power cable to the power adapter (2).
²²
Plug the power cable into the power outlet (3).
The power adapter indicator lights up.
10
Preparing the notebook for use
3
2
A26391-K84-Z100-1-7619