Connecting External Devices - Siemens Mobile 750 Operating Manual

Connecting external devices

Disconnect all the devices from their respective power sources when you connect or
!
disconnect a device. Read the documentation on the external device before connecting it.
Do not connect or disconnect cables during a thunderstorm.
Always take hold of the actual plug body. Never unplug a cable by pulling the cable itself!
Connect and disconnect the cables in the order described below.
Connecting cables
•
Turn off all power and equipment switches.
•
Pull all power plugs out of the grounded power outlets.
•
Connect all the cables to the notebook and the external devices. Please observe under all
circumstances the information provided in the chapter "Important notes".
•
Plug all data communication cables into the utility sockets.
•
Plug all power cables into the grounded power outlets.
Disconnecting cables
•
Turn off all power and equipment switches.
•
Pull all power plugs out of the grounded power outlets.
•
Unplug all data communication cables from the utility sockets.
•
Disconnect all the cables from the notebook and the external devices.
A26391-K84-Z100-1-7619
81