Boot Options - System Startup Options; System Memory - Main Memory; Extended Memory - Siemens Mobile 750 Operating Manual

Main menu - Making system settings

Boot Options - System startup options

This field calls the submenu to select the settings for the system startup of the device.
Phoenix BIOS Setup
Main
Boot Options
Summary screen:
Floppy check:
Quiet Boot:
↑↓
F1 Help Select Item
← →
ESC Exit Select Menu
Example for submenu Boot Options
Summary screen - Displaying the configuration at system startup
This field is used to specify whether the configuration is displayed at system startup.
The configuration is displayed when the device is switched on.
Enabled
The configuration is not displayed when the device is switched on.
Disabled
Floppy check - Checking the disk drive
This field can make the system startup faster.
The entire notebook configuration is checked when the notebook is switched on.
Enabled
The disk drive is not checked in the self-test when the device is switched on.
Disabled
Quiet Boot
Instead of a start information a logo is displayed on the screen.
The logo is displayed on the screen. A switch to the start information is made if you
Enabled
press the
The start information is displayed on the screen.
Disabled

System Memory - Main memory

This field indicates the size of the available base memory below 1 Mbyte.

Extended Memory

This field indicates the size of the memory above 1 Mbyte.
A26391-K84-Z100-1-7619
[Enabled]
[Disabled]
[Enabled]
Space Change Values
Enter Select
>(VF@
>(VF@
key or if errors occur.
Item Specific Help
F9 Setup Defaults
²
Sub-Menu F10 Previous Values
BIOS Setup
47