Docking Menu - Configuring The Mobidock; Floppy Disk B: - Set External Floppy Disk Drive; Ide Adapter 1 Master/Ide Adapter 1 Slave - Setting External Hard Disk Drives - Siemens Mobile 750 Operating Manual

Docking menu - Configuring the MobiDock

Docking menu - Configuring the MobiDock
The Docking menu is only available if the notebook is connected to a MobiDock.
You can set up the following security features in the Docking menu
•
external floppy disk drive (in the Diskette B: field)
•
external hard disk drive (in the fields marked IDE Adapter 1)
•
loading the system from hard disk C:
•
MobiDock password
Phoenix BIOS Setup
Main Advanced
Diskette B:
²
IDE Adapter 1 Master
²
IDE Adapter 1 Slave
Boot Hard Disk:
Integrated IDE adapter
SCSI Controller:
Docking Station Password is
Set Docking Station Password
↑↓
F1 Help Select Item
← →
ESC Exit Select Menu
Example of the Docking menu

Floppy disk B: - Set external floppy disk drive

This field shows the type of the floppy disk drive in the MobiDock.
A floppy disk drive is not installed.
Not Installed
360KB - 5 1/4", 720KB - 3 1/2", 1.2MB - 51/4", 1.4MB - 3 1/2", 2.8MB - 3 1/2"
The entry depends on the floppy disk drive in the MobiDock.
IDE Adapter 1 Master/IDE Adapter 1 Slave -
Setting external hard disk drives
This setting is only possible when the Onboard IDE-Adapter field in the Advanced/Integrated
i
Peripheral menu is set to Auto or Primary.
This field shows the type of the hard disk drive in the MobiDock. How to change the settings for the
hard disk drives is described in the IDE Adapter 0 field of the Main-Setup.
A26391-K84-Z100-1-7619
(in the Boot Hard Disk field)
(in the Docking Station Password is field)
Security Power
[Not installed]
[None]
[None]
[Notebook]
[Secondary]
[Enabled]
[Disabled]
[Press Enter]
Space Change Values
Enter Select
Docking
Boot
Item Specific Help
——————————————————————
F9 Setup Defaults
²
Sub-Menu F10 Previous Values
BIOS Setup
Exit
63