Operating The Zip Drive - Siemens Mobile 750 Operating Manual

Operating the Zip drive

Operating the Zip drive
Before the Zip drive can be used, you must install the Iomega software on your notebook. To do this,
use the Iomega installation disk provided and the Zip disk "Iomega Tools".
Installing the Iomega software
²²
Install the Zip drive in the right slide-in module.
²²
Connect the floppy disk drive to the parallel port (see "Connecting the floppy disk drive
externally".
²²
Supply the notebook with power via the power adapter.
²²
Switch on the notebook and start Windows.
²²
Insert the Iomega installation floppy disk in the floppy disk drive.
²²
Start the a:\setup.exe program from the Iomega installation disk with Start - Run (Windows 9x) or
File - Run (Windows 3.1).
²²
Follow the instructions on the screen.
²²
Switch on the notebook again and start Windows.
²²
Insert the Zip disk "Iomega Tools" in the Zip drive.
²²
Follow the installation instructions displayed on the screen to finish the software installation.
Reinstalling the Iomega software from the Zip disk
If the Zip drive of your notebook has already been assigned a drive letter in My Computer or in the File
Manager, you can install the Iomega software directly from the Zip disk "Iomega Tools".
²²
Install the Zip drive.
²²
Switch on your notebook and start Windows.
²²
Insert the Zip disk "Iomega Tools" in the Zip drive.
²²
Open a search window for the Zip disk "Iomega Tools" with My Computer (Windows 9x).
²²
Double-click on INSTALL.EXE.
²²
Follow the installation instructions displayed on the screen to finish the software installation.
A26391-K84-Z100-1-7619
Preparation for use and operation
31