Security menu - Setting up the security features
Security menu - Setting up the security features
You can set up the following security features in the Security menu:
•
Setting a supervisor password (in the field Set Supervisor password)
•
Setting a user password (in the field Set User password)
•
Set a hard disk password (in the Hard Disk Security submenu)
•
Activating the password query for system startup (in the field Password on boot)
•
Blocking access to the diskette (in the field Diskette access)
Phoenix BIOS Setup
Main
Advanced
Supervisor Password is
User Password is
Set Supervisor Password
Set User Password
²
Hard Disk Security
Password on boot:
Diskette access:
Flash Update:
↑↓
F1
Help
Select Item
← →
ESC Exit
Select Menu
Example for Security menu
Supervisor Password is/User Password is - Password display
Disabled, Enabled
These fields indicate whether the appropriate password is installed or not.
Set Supervisor Password
This field enables you to install the supervisor password.
Set User Password
This field enables you to install the user password. However, you can only assign the user password if
a supervisor password has already been assigned.
A26391-K84-Z100-1-7619
Security
Power
Disabled
Disabled
[Press Enter]
Press Enter
[Disabled]
[User]
[Disabled]
Space
Change Values
Enter
Select
Docking
Boot
Item Specific Help
——————————————————————
F9 Setup Defaults
²
Sub-Menu
F10 Previous Values
BIOS Setup
Exit
57