Transferring Data With The Infrared Interface - Siemens Mobile 750 Operating Manual

You should set a docking station password to prevent unauthorized access to the MobiDock.
i

Transferring data with the infrared interface

The infrared interface (Fast IrDA) at the back of the notebook enables wireless serial data transfer.
By default, the infrared interface is set to COM2 in the setup. You can change the setting in the
IrDA Port field in the Integrated Peripherals submenu in Advanced Setup.
The infrared interface can only be used, when the infrared interface is enabled in the
i
IrDA Port field in the Integrated Peripherals submenu in Advanced Setup.
²²
Set up the infrared transmitter and receiver as illustrated above.
The devices may be no more than one meter apart. The infrared interface of one device must be
in the range of influence (horizontally approx. 30° and vertically approx. 15°) of the infrared
interface of the other device.
A26391-K84-Z100-1-7619
Connecting external devices
85