Preparation For Use And Operation; Unpacking And Checking Your Notebook; Selecting The Location - Siemens FUJITSU AMILO Li Series Getting Started

Preparation for use and operation

Please observe the safety information in the section
You must charge the battery and install the application programmes before you can work with the
notebook. The Windows operating system and the drivers required are already pre-installed.
This chapter also describes the basics for operating your notebook.

Unpacking and checking your notebook

Should you discover any damage incurred during transportation, notify
your local sales outlet immediately!
► Unpack all the individual parts.
Transport Packaging
► Check your notebook for damage incurred during transportation.
We recommend that you keep the original packaging material.
You may need the packaging in the future if you need to transport your device.

Selecting the location

Notebook Location,selectingthe Power adapter
Select a suitable location for the notebook before setting it up. Consider
the following points when selecting a location:
• Never place the notebook on a soft surface (e.g. carpeting, upholstered furniture,
bed). This can block the air vents and cause damage due to overheating.
• Do not place the notebook directly on your legs for extended periods. The
underside of the notebook heats up during normal operation. Extended contact
with the skin can become unpleasant or even result in burns.
• Place the notebook on a stable, flat, non-slip surface. Please note that
the rubber feet may mark certain types of surfaces.
• Keep other objects 100 mm away from the notebook and its mains
adapter to ensure adequate ventilation.
• Never cover the ventilation slots on the notebook or the mains adapter.
• Do not expose the notebook to extreme environmental conditions. Protect
the notebook against dust, humidity and heat.
10600900852, edition 1
Preparation for use and operation
"Important notes", Page 2.
English - 5