Hard Disk Timeout - Hard Disk Energy Saving Function; Video Timeout - Energy Saving Functions For The Monitor; Lid Switch - Lid Mode; Battery Low Suspend - Suspend Mode For Low Battery Capacity - Siemens Mobile 750 Operating Manual

Power menu - Setting energy saving functions

Hard Disk Timeout - Hard disk energy saving function

This field can only be changed, if the PowerSaving field is set to Customize.
1, 2, 5, 10, 20, 30 min
The hard disk drive motor is switched off after the specified time without system
activity.
The PC does not switch off the hard disk drive motor.
Off

Video timeout - Energy saving functions for the monitor

This field can only be changed, if the PowerSaving field is set to Customize .
2, 5, 10, 15, 20, 30 min
The screen goes dark after the specified time without system activity.
The screen does not go dark.
Off

LID Switch - LID mode

This field specifies which mode the device is switched into when the notebook monitor is closed.
The screen goes dark.
LCD Off
Standby Mode The system is switched into the standby mode (see Standby Mode )
Suspend Mode The system state is buffered in the DRAM memory. After folding open the monitor, the
switch-on button must be pressed to return to the state prior to closing.
Battery Low Suspend - Suspend mode for low battery
capacity
This field indicates whether a switch is to be made to suspend mode when the battery capacity is low.
The function is enabled; the device is switched to suspend mode when the battery
Enabled
capacity is low.
The function is disabled.
Disabled
A26391-K84-Z100-1-7619
BIOS Setup
61