Removing And Installing Drives And Batteries - Siemens Mobile 750 Operating Manual

Preparation for use and operation

Removing and installing drives and batteries

Only use batteries designed for the this notebook.
!
Never use force when inserting or removing a battery.
Make sure that no foreign objects enter the slots.
Drives can only be installed in the right slide-in module.
Batteries can be installed in the left and right slide-in module.
Removing drive/battery
Installing drive/battery
26
2
1
²²
Switch off the notebook. You can leave the
notebook on provided the battery is not the
notebook's only power source.
²²
Swing open the display.
²²
Place the notebook on a level surface.
²²
Press the battery's unlock button (1).
The release button for drives is located on the
right side.
²²
Pull the battery (2) or, on the right side, the
drive out of the slide-in module.
²²
Swing open the display.
²²
Place the notebook on a level surface.
²²
Place the battery in the slot so that the
contacts enter first.
²²
Push the battery into the slot until you feel it
locking into place.
The battery
A26391-K84-Z100-1-7619