Hard Disk Security - Setting Hard Disk Passwords; Password On Boot - Password Query During System Startup; Diskette Access - Access Privilege For Disk Drive; Flash Update - Permission For Bios Update - Siemens Mobile 750 Operating Manual

BIOS Setup

Hard Disk Security - Setting hard disk passwords

This field calls the submenu to make the settings for the hard disk passwords.
Phoenix BIOS Setup
Security
Hard Disk Security
HD1 Password is:
Set HD1 password:
↑↓
F1 Help Select Item
← →
ESC Exit Select Menu
Example for submenu PCI Devices
HD1 Password is
Disabled, Enabled
This field indicates whether the appropriate password is installed or not.
Set HD1 password
This field enables you to install the hard disk password. The hard disk password only applies to the
hard disk in the notebook and not the one in the MobiDock. If a hard disk password has already been
set, you must enter the set password before you can change or delete it.

Password on boot - Password query during system startup

Requirement: the supervisor password or user password must be installed.
This field is used to specify whether the password is to be queried when the operating system is
booted.
The password is queried only when BIOS Setup is called.
Disabled
The password is queried before the operating system is booted and when BIOS Setup is
Enabled
called.

Diskette access - Access privilege for disk drive

This field is used to specify whether diskettes can be accessed.
Both users and the supervisor can access diskettes.
User
Only a supervisor can access diskettes.
Supervisor

Flash update - Permission for BIOS update

This field specifies whether a BIOS flash update may be carried out on the notebook.
BIOS flash update not possible.
Disabled
BIOS flash update is permitted.
Enabled
58
Security menu - Setting up the security features
Disabled
[Press Enter]
Space Change Values
²
Enter Select Sub-Menu
Item Specific Help
F9 Setup Defaults
F10 Previous Values
A26391-K84-Z100-1-7619