Reset Configuration Data; Large Disk Access Mode - Hard Disk Access - Siemens Mobile 750 Operating Manual

BIOS Setup

Reset Configuration Data

This field is used to specify whether the configuration data is reset and reinitialized when the system is
started.
The Plug&Play functionality ascertains the current configuration data and uses it to
No
initialize the installed modules and drives. There is no update when the system is
started.
When the system is started the old configuration data is reset. The new configuration
Yes
data is determined by means of the Plug&Play functionality. The mounted modules and
drives are then initialized with this data.
This field only takes effect if the notebook is connected to a MobiDock.
i

Large Disk Access Mode - Hard disk access

This field is used to specify the type of hard disk access for large hard disks (more than 1024
cylinders, 16 heads). The default setting depends on the operating system used.
the operating system uses MS-DOS-compatible hard disk accesses.
DOS
If the operating system uses hard disk accesses which are not MS-DOS-compatible
Other
(e.g. Novell, SCO Unix).
56
Advanced menu - Advanced system settings
A26391-K84-Z100-1-7619