Table of Contents
Advertisement
BIOS Setup
Boot Hard Disk - Specifying hard disk for system load
This setting is only possible when the Onboard IDE-Adapter field in the Advanced/Integrated
i
Peripheral menu is set to Auto or Primary.
This field is used to specify which hard disk is to be treated as hard disk C:. This is the hard disk from
which the operating system is loaded.
The operating system is loaded from the notebook's hard disk.
Notebook
The operating system is started from the 1st MobiDock hard disk.
MobiDock
Integrated IDE Adapter - Setting the IDE Controller in the
MobiDock
This setting is only possible when the Onboard IDE-Adapter field in the Advanced/Integrated
i
Peripheral menu is set to Auto or Primary.
This field is used to enable or disable the IDE controller in the MobiDock.
The IDE drives in the MobiDock are operated on the secondary IDE channel (IRQ15).
Secondary
The IDE controller in the MobiDock is disabled.
Disabled
SCSI Controller - Setting the MobiDock SCSI controller
This field is used to enable or disable the SCSI controller in the MobiDock.
The SCSI controller in the MobiDock is enabled.
Enabled
The SCSI controller in the MobiDock is disabled.
Disabled
Docking Station Password is - Password display
This field is only available if the notebook is connected to a MobiDock. This field indicates whether
MobiDock access is controlled by means of a password.
You have to enter the docking station password in order to access the MobiDock.
Enabled
You can access the MobiDock without having to enter a password
Disabled
You should set a docking station password to prevent unauthorized access to the MobiDock.
i
Set Docking Station Password -Setting the
Docking Station Password
This field enables you to install the docking station password.
64
Docking menu - Configuring the MobiDock
A26391-K84-Z100-1-7619
Hide quick links:
Advertisement
Table of Contents
