Consumer Operating Instructions Quartz Tube Maintenance - Paramount Fitness Ultra UV2 Instruction & Operation Manual

CONSUMER OPERATING INSTRUCTIONS
QUARTZ TUBE MAINTENANCE
NOTICE
to ensure optimum performance.
1. Turn off all power to the ULTRA UV2 unit and all
other pool equipment. Unplug the unit from its power
receptacle or turn OFF the circuit breaker that is the
ULTRA UV2's power source. Before proceeding to
step 2 allow at least 15 minutes for the lamp(s) in the
unit to cool.
DANGER
without first disconnecting the power (power source)
for the Ultra UV2 unit. Never remove the Ultra UV2
unit's cover without turning off the pump.
2. Remove the three screws that secure the plastic
cover then remove Fig. 1.
WARNING
rubber gloves and safety eye wear. Do not handle a
hot lamp or serious burns will occur.
NOTICE
& greatly shorten lamp life.
3. Disconnect all lamps by pressing the release tabs on
connectors and gently pulling apart. Fig. 8
4. Remove the spring clip Fig. 9. Carefully lift the old
lamp assembly, including lamp holder, from the quartz
tube Fig. 10. Do not pull excessively on the lamp
wires. Set aside the lamp assembly in a safe area to
avoid breaking or chipping.
5. Turning counter-clockwise, unscrew and remove the
round aluminum sealing nut. Fig. 11
6. Carefully lift the aluminum compression washer
from the top of the quartz tube making sure not to
lose the black gasket that cushions the edge of the
quartz tube. Fig. 12
7. Grip quartz tube with both thumbs inside and pull up.
Once the O-ring breaks free, the quartz tube should
lift out easily. Fig. 13
NOTICE
care and do not set it down on a hard surface. Do not
use abrasive cleaners or pads.
Cleaning the quartz tube:
The quartz tube requires
cleaning every 6 months
Never remove
the electrical
enclosure cover
Before removing
lamps you must
wear protective
Do not touch the glass
part of the lamp as body
oils will create hot spots
The quartz tube is
fragile, be sure to
handle it with proper
10
Fig. 8
Fig. 9
Fig. 10
Fig. 11
Fig. 12