Paramount Fitness Ultra UV2 Manual

Cleaning, replacing and resealing the quartz tube

Hide thumbs Also See for Ultra UV2:

Download this manual

When using this electrical equipment, basic safety precautions should

always be followed, including the following:

• Follow all applicable electrical codes.

• Turn off power at main source before making any electrical connections

or servicing the unit.

• To reduce the risk of electric shock, injury or death disconnect unit from

power supply

• Follow the instructions or risk of serious injury or death could occur!

UV EXPOSURE & PROTECTION:

UV-A and UV-B radiation can have adverse short and long term effects on

the eyes and skin. Never look directly at a UV lamp that is connected to a

power source. Avoid UV skin exposure at all times.

Pool, Spa & Pond

Water Sanitizer 4BJ1

295 East Corporate Place • Suite 100 • Chandler, AZ 85225

Toll Free: 1.800.621.5886 • Phone: 480.893.7607 • Fax: 480.753.3397

Paramount@1Paramount.com • www.1Paramount.com

004-027-8709-00

WARNING

EPA Registered

#084221-AZ-001

REV 01

ECN_1582

Cleaning, Replacing And

Resealing The Quartz Tube

IMPORTANT SAFETY

INSTRUCTIONS: READ

COMPLETELY BEFORE

PROCEEDING.

Publish 07/12/18

Page 1 Cleaning, Replacing And Resealing The Quartz Tube IMPORTANT SAFETY WARNING INSTRUCTIONS: READ COMPLETELY BEFORE PROCEEDING. When using this electrical equipment, basic safety precautions should always be followed, including the following: • Follow all applicable electrical codes. • Turn off power at main source before making any electrical connections or servicing the unit.
Page 2: Important Safety Instructions
Signal Words and Symbols Used In This Manual This Owner’s Manual and Installation Guide contains specific precautions and symbols to identify safety-related information. You will find DANGER, CAUTION, WARNING and NOTICE symbols which require special attention. Please read them carefully and follow these precautions as indicated! They will explain how to avoid hazards that may endanger you or persons using or maintaining your pool or spa.
Page 3 Cleaning the quartz tube: The quartz tube requires cleaning every 6 months to ensure optimum performance. 1. Turn off all power to the ULTRA UV2 unit and all other pool equipment. Unplug the unit from its power receptacle or turn OFF the circuit breaker that is the ULTRA UV2’s power source.
Page 4 Replace aluminum washer then screw on the quartz sealing aluminum nut to hand tight plus ½ turn. 12. Turn power on to the Ultra UV2 unit. Turn pump on to check for leaks. Confirm that there are no leaks then turn off pump and power off to the unit.