Production - Pfaff 3819 series Instruction Manual

Production

10 Production
The following appear on the display (from the left):
 max. speed (e.g. 3500 revolutions per minute), it can be changed using the correspond-
 Program number (1 – 99).
 Stitch length (e.g. 3.5 mm), it can be changed using the corresponding plus/minus key.
 Coded via parameter 810.
 Piece counter (e.g. 2000).
The function of the other keys is explained in the "Operating Controls" chapter.
28
3500
Fig. 10 - 01
ing plus/minus key. Coded via parameter 809.
The electronically set stitch length here must be identical to the mechanically set stitch
length on the sewing head. See the "Stitch length" chapter in the adjustment manual to
set the stitch length.
1 3,5 2000
0 00