Table of Contents
Advertisement
Production
10
Programming
.07
Control panel display in programming mode
No
VAL
P01
4000
0
00
Fig. 10 - 06
The display shows the selected programmable parameter number (P01) on the left and the
associated values of the trouser waistband further to the right.
Example:
The maximum program speed is limited to 4000 rpm.
The programmable parameter numbers (P01, P02, ..., P08) can be changed with the
corresponding plus/minus key.
The entered values are taken over by pressing the "Sew/Enter" key and the machine
switches to input mode.
The entered values are taken over by pressing the "Program" key and the machine switches
back to the initial status of input mode.
35
Advertisement
Table of Contents
